All the testing methods below uses a multimeter and hence its How to test FET’s especially the JFET and MOSFET using a multimeter.
How to test an FET ?
FET testing method
FETs are checked by measuring different resistances by a multimeter. When resistance is checked between source and drain, it should be of the order of 10 kohms.
How to test a JFET ?
JFET testing methods
When a JFET is checked as a diode (gate-to-channel junction) multimeter should indicate low resistance between gate and source with one polarity and very high resistance between gate and source with meter polarity reversed.
Troubleshooting a JFET test
If the meter indicates high resistance with both the polarities, it means that the gate junction is open. On the other hand, if meter indicates low resistance with both polarities, it means that the gate junction is shorted.
How to test a Mosfet ?
Mosfet testing methods
While checking MOSFET, the resistance measured between gate and drain should be infinitely high in either polarity. Low resistance means faulty device.
0 comments:
Post a Comment