This hack tutorial will allow you to install unsigned applications in your any symbian 9.2 OS featured Cell phone. It will allow you to give applications full permissions. Basically, it will give you Freedom from the firmware. we will not be responsible for anything happening to your phone, though Nothing bad should happen anyway. This hack has been confirmed on the N95, N95 8GB, N82 and some others. If you perform this hack, please tell me your phone model
Tools you'll need:
Download ActivePython FROM HERE, install it.
Download and install PySerial from FROM HERE.
Download and install AppTRK (to your phone) FROMHERE.
Download Hack Perms FROM HERE.
After downloading and installing the above softwares, connect your phone to your PC via USB in PC Suite mode.
Go to Control Panel>System>Hardware>Device Manager>Ports OR Control Panel>Hardware and Sound>Device Manager>Ports(Windows Vista ).
Once you're there, look for your phone, in my case it's called 'Nokia GSM Phone USB (COM3)'. Make a note of the number after COM, you'll need it later.
Open AppTRK on your phone and press cancel when it trys to connect via bluetooth. Go to options>settings>connection and change it to USB. Go back and press options then connect. This is what you should see:
Now open up the Hack Perm python file in notepad on your PC, press CTRL+F on your PC and search for "ser =" (Without quotes). Once you're there change the 5 that's in the brackets to the 1 less than the number that followed COM in the step above.
For example, if your number was 6, you would change the number in the brackets to 5 and if your number was 5, you would change the number in the brackets to 4. Once you've done that, save the python file. Please don't be mistaken, you must choose save not SAVE AS.
Once you have done this, just double click the Hack Perms file and wait for about 5 seconds, during this time, you should see this, notice the "!!!!!!!!!!!candidate!!!!!!!!!!!", this shows you've been successful:
This hack will be temporary until you follow these steps
Go to your applications folder and open it, it should be called profiler.
Go to: Options>Profiler>Start
When you see 'Status:Sampling' at the top of the application's screen go to Options>Profiler>Stop.
Now wait for about 1 second for it to show 'Status:Finished' and then exit the application.
0 comments:
Post a Comment