PRE AMPLIFIER

A preamplifier (preamp), or control amp in some parts of the world, is an electronic amplifier which precedes another amplifier to prepare an electronic signal for further amplification or processing. The preamplifier circuitry may or may not be housed as a separate component.

Description

In general, the function of a preamp is to amplify a low-level signal to line-level. A list of common low-level signal sources would include a pickup, microphone, turntable or other transducer.Equalization and tone control may also be applied.

In a home audio system, the term 'preamplifier' may sometimes be used to describe equipment which merely switches between different line level sources and applies a volume control, so that no actual amplification may be involved. In an audio system, the second amplifier is typically a power amplifier (power amp). The preamplifier provides voltage gain (about: 10millivolts to 1volt) but no significantcurrent gain. The power amplifier provides the higher current necessary to drive loudspeakers.

Preamplifiers may be:

• incorporated into the housing or chassis of the amplifier they feed
• in a separate housing
• mounted within or near the signal source, such as a turntable, microphone or musical instrument.

Examples

• The integrated preamplifier in a foil electret microphone.
• The first stages of an instrument amplifier.
• A stand-alone unit for use in live music and recording studio applications.
• As part of a stand-alone channel strip or channel strip built into an audio mixing desk.
• A masthead amplifier used with television receiver antenna or a satellite receiver dish.
• The circuit inside of a hard drive connected to the magnetic heads or the circuit inside of CD/DVD drive which connects to the photodiodes.
• A switched capacitor circuit used to null the effects of mismatch offset in most CMOS comparator based flash analog to digital converters